- This topic has 3 replies, 3 voices, and was last updated 15 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
How do you get 10 x 20 when the manual said you can only go as high as 15 x15? 
It’s the number of squares. RTR can do 225 squares so you could have 225 x 1. 15 x 15 = 225 but 10 x 20 is 200. But this makes a big track and you need a good computer to run them if you decorate them. The track I made is called bt track and can be dloaded from my web site.
Dave
The manual says 15×15 are 255 fieldsegments. Dave´s Board has 200 segments. you have to be inbound of 255 segs. but the longest is 99×2.
Peter
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.